Water is lazy. Push it through a bed of coffee under pressure, and it will find the easiest path. If one part of the puck is looser than the rest, water rushes through that part, over-extracting it while the rest of the coffee is barely touched. That is called channeling, and it is the reason a shot can taste sour and bitter at the same time.
Good puck preparation is simply about giving the water no easy path. It sounds technical. It isn’t.
1. Dose consistently
Weigh your dose every time, using the amount your basket is designed for — usually printed on it, or around 18 g for a standard double. Too little coffee leaves headroom for the puck to shift; too much and the shower screen presses into it.
2. Break up the clumps
Many grinders produce small clumps of grounds, and clumps create uneven density. The most effective fix is a distribution tool with very fine needles, stirred gently through the grounds in small circles until the bed is even and fluffy. A simple homemade version with thin acupuncture-style needles in a cork works just as well as an expensive one.
3. Level the bed
Before tamping, the surface should be flat. A light tap of the portafilter on your palm or a few gentle swipes are usually enough. Avoid banging the portafilter on the counter; it can crack the bed apart.
4. Tamp level, not hard
The amount of pressure matters far less than people think — once the coffee is fully compressed, pushing harder does very little. What matters is that the tamp is level. Keep your wrist straight, elbow above the portafilter, and press down firmly once. A tamper that fits your basket closely makes this much easier.
How to tell it is working
A well-prepared puck produces a shot that begins evenly across the basket, with steady flow and no sudden spurts. After the shot, the puck should look uniform with no small holes or pockmarks. If you see them, revisit the distribution step first.